Best practices for bio-friendly drain cleaning: An eco-friendly DIY drain cleaner can help you avoid the disturbance that comes with a clogged tub, sink, or shower drain. This straightforward solution, which is manufactured from a few staple pantry items, is safer and less expensive than chemical cleaners. Before using caustic1 and hazardous commercial drain cleaners, try this DIY approach first. It might take a few tries to totally remove a particularly stubborn clog. Discover at plumbingrepairtips.com!
What Is the Purpose of a DIY Drain Cleaner?
Sometimes the potency of a chemical drain cleaner is not necessary. A DIY drain cleaner composed of boiling water and a solution of baking soda as well as white vinegar can frequently be used to unclog a slow drain. Vinegar, a mild acetic acid, and baking soda, a basic material called sodium bicarbonate, combine to produce a fizzy, bubbling action that produces carbon dioxide, which can remove clogs so they can be cleaned down the drain. With a dependable recipe for clearing clogs, follow the mixture with boiling water to help wash away any debris or obstructions.
Best practices for bio-friendly drain cleaning
To produce your own DIY drain cleaner and unclog your shower, tub, or sink, follow these precise instructions.
Remove any remaining water
If the water in your sink, bathtub, or shower has backed up, use a cup to scoop out as much of the water as you can and pour it into a bucket. A tiny quantity of water can be left in the drain opening itself, but in order for your drain cleaner to reach the clog as closely as possible, the shower, sink, or tub should be mainly empty.
Add Boiling Water
To improve your access to the drain when working on a sink or tub, take out the pop-up sink stopper or tub stopper first. Pour boiling water from a small pot into the drain.
Include Baking Soda
Over the drain, pour 1/2 cup of baking soda.
Dispense half a cup of vinegar down the drain.
Shut Off the Drain
If a stopper is available, place it over the drain and let the combination work for ten minutes. It’s not essential to cover the drain because the mixture of vinegar and baking soda will froth and bubble a lot. Covering the drain pushes the reaction downward rather than up and out of the drain.
Put in Extra Boiling Water
Fill the drain with boiling water from another pot. This will assist in clearing any obstructions that the vinegar and baking soda were able to remove.
Empty the Drain
To aid in clearing any last bits of debris from the drain pipe, run hot water down the drain using the faucet.
As needed, repeat
Try the drain cleaner again if, following the initial attempt, you see some improvement. After a few tries, if the drain is still slow, you might need to try a more drastic fix.
If this solution is ineffective at unclogging the drain, it may be necessary to disassemble the drain trap and/or use a drain snake to snake the drain. Before removing the trap, place a bucket underneath it to collect water (and crud). Using a DIY drain cleaner has the advantage of not requiring you to worry about hazardous chemicals spilling out with the water. It could be time to bring in a plumber if no amount or kind of drain cleaning helps.
When Using DIY Drain Cleaners, Patience is Key
If you have attempted one of these do-it-yourself drain cleaner solutions and were not very successful, try again. It takes a few runs for natural drain cleaners to work, so be patient.
Use a drain snake as a last resort. It’s possible that using a natural drain cleaner disintegrated and dislodged the blockage, only requiring a little prodding from the drain snake to remove it. You can use a metal coat hanger with a curved hook on the end to catch drain debris if you don’t have a drain snake.
Avoid Synthetic Drain Cleaners
It could be tempting to use chemical drain cleaners if you have attempted homemade DIY drain cleaners as well and your pipes are still clogged. Synthetic drain cleaners might seem like a less expensive solution up front, but they eventually cause expensive issues.
- Kindly give it another thought and give a plumber a call. Caustic sulfuric acid as well as sodium hydroxide, which are ingredients in synthetic drain cleaners, gradually corrode and destroy your plumbing system.
- Choose a commercial drain cleaner that employs monosodium sulfate, a harmless acid that rapidly slices through drain sludge, if you choose to use one before contacting the plumber.
- Another common active component in drain cleaning solutions is lye. Although lye, such as other synthetic chemical drain cleaners, is caustic, it will dissolve hair and soap scum. While using lye to clean your drain in small amounts is generally harmless, using too much of it might be harmful.
- Wear rubber gloves and safety glasses if you want to use lye. Pour a tiny quantity of the mixture down the plugged drain. After giving it 20 minutes to work its magic and dissolve the hair, soap scum, and grease clogging your drain, flush your pipes with boiling water.
How do you prevent clogs in your drains?
Make sure that there is no food, hair, or trash in your shower, tub, or sink. Use a drain cleaner if the drains are running slowly after giving them a thorough rinse with hot water.
Why do drains get clogged?
Everything, including food particles, animal fur, hair, tiny items, mineral buildup, grime, and more, can clog drains. The material gathers in clusters and becomes stuck in the drain pipe.
What prevents clogs in drains?
Utilizing a strainer can assist in maintaining clear, debris-free drains.